Modification unauthorized. Use Discussion page if necessary

Discussion Page Content

Original HOWTO

  From DOS/Windows to Linux HOWTO
  By Guido Gonzato, ggonza at
  Version 1.3.5. 31 August 2000.

  This HOWTO is dedicated to all the (soon to be former?) DOS and Win­
  dows users who have decided to switch to Linux, the free UNIX clone.
  The purpose of this document is to help the reader translate his or
  her knowledge of DOS and Windows into the Linux environment, as well
  as providing hints on exchanging files and resources between the two

  Table of Contents

  1. Introduction

     1.1 Is Linux Right for You?
     1.2 It Is. Tell Me More
        1.2.1 Introductory Concepts
        1.2.2 Getting Help
     1.3 Conventions

  2. For the Impatient

  3. Meet bash

  4. Files and Programs

     4.1 Files: Preliminary Notions
     4.2 Symbolic Links
     4.3 Permissions and Ownership
     4.4 Files: Translating Commands
        4.4.1 Examples
     4.5 Running Programs: Multitasking and Sessions
     4.6 Running Programs on Remote Computers

  5. Using Directories

     5.1 Directories: Preliminary Notions
     5.2 Directories Permissions
     5.3 Directories: Translating Commands
        5.3.1 Examples

  6. Floppies, Hard Disks, and the Like

     6.1 Managing Devices the DOS Way
     6.2 Managing Devices the UNIX Way
     6.3 Backing Up

  7. What About Windows?

  8. Tailoring the System

     8.1 System Initialisation Files
     8.2 Program Initialisation Files

  9. Networking: Concepts

  10. A Bit of Programming

     10.1 Shell Scripts: .BAT Files on Steroids
     10.2 C for Yourself
     10.3 X11 Programming
        10.3.1 Multi-Platform Programming

  11. The Remaining 1%

     11.1 Running DOS/Windows Apps
     11.2 Using tar and gzip
     11.3 Installing Applications
     11.4 Tips You Can't Do Without
     11.5 Where to Find Applications
     11.6 A Few Things You Couldn't Do
     11.7 Practicing UNIX under DOS/Win
     11.8 Common Extensions and Related Programs
     11.9 Converting Files
     11.10 Free Office Suites

  12. The End, for Now

     12.1 Copyright
     12.2 Disclaimer


  1.  Introduction

  1.1.  Is Linux Right for You?

  Let's start politically correct. Throughout this document I say
  ``Linux'', but I mean ``GNU/Linux''. Please go to
  <> to see why.

  You want to switch from the DOS/Windows world to Linux? Good idea:
  Linux is technically superior to DOS, Windows 9x and even Windows NT.
  But beware: it might not be useful for you. These are the main
  differences between DOS/Windows and Linux:

  ·  Windows runs Microsoft Office and lots of games; is perceived to be
     easy to install and configure; is notoriously unstable; performs
     poorly; crashes are frequent.

  ·  Linux runs StarOffice, scores of technical software and fewer
     games; can be tricky to install and configure; is rock solid;
     performs impeccably; crashes are extremely rare.

  It's up to you to decide what you need. Furthermore, Linux gives you
  power, but it takes some time to learn how to harness it. Thus, if
  mostly need commercial sw, or if you don't feel like learning new
  commands and concepts, you had better look elsewhere. Be aware that
  many newcomers give up because of initial difficulties.

  Work is underway to make Linux simpler to use, but don't expect to be
  proficient with it unless you read a lot of documentation and use it
  at least for a few months. Linux won't give you instant results. In
  spite of these warnings, I'm 100% confident that if you are the right
  user type you'll find in Linux your computer Nirvana. By the way,
  Linux + DOS/Win can coexist happily on the same machine.

  Prerequisites for this howto: I'll assume that

  ·  you know the basic DOS commands and concepts;

  ·  Linux, possibly with X Window System (X11 for short), is properly
     installed on your PC;

  ·  your shell (the equivalent of COMMAND.COM) is bash.

  Unless specified, all information in this work is aimed at bad ol'
  DOS.  There is information about Windows here and there, but bear in
  mind that Windows and Linux are totally different, unlike DOS that is
  sort of a UNIX poor relation.

  Please also note that this work is neither a complete primer nor a
  configuration guide!

  The latest version of this document is available in several formats on

  1.2.  It Is. Tell Me More

  You installed Linux and the programs you needed on the PC. You gave
  yourself an account (if not, type adduser yourname now!) and Linux is
  running. You've just entered your name and password, and now you are
  looking at the screen thinking: ``Well, now what?''

  Now, don't despair. You're almost ready to do the same things you used
  to do with DOS/Win, and many more. If you were running DOS/Win instead
  of Linux, you would be doing some of the following tasks:

  ·  running programs and creating, copying, viewing, deleting,
     printing, renaming files;

  ·  CD'ing, MD'ing, RD'ing, and DIR'ring your directories;

  ·  formatting floppies and copying files from/to them;

  ·  tailoring the system;

  ·  surfing the Internet;

  ·  writing .BAT files and programs in your favourite language;

  ·  the remaining 1%.

  You'll be glad to know that these tasks can be accomplished under
  Linux in a fashion similar to DOS. Under DOS, the average user uses
  very few of the 100+ commands available: the same, up to a point,
  applies to Linux.

  1.2.1.  Introductory Concepts

  The best way to learn something new is to get your feet wet. You are
  strongly encouraged to experiment and play with Linux: unless you
  login as ``root'', you can't damage the system that way. A few points:

  ·  first of all, how to quit Linux safely. If you see a text mode
     screen, press <CTRL-ALT-DEL>, wait for the system to reboot, then
     switch off the PC. If you are working under X Window System, press
     <CTRL-ALT-BACKSPACE> first, then <CTRL-ALT-DEL>. Never switch off
     or reset the PC directly: this could damage the file system;

  ·  unlike DOS or Windows, Linux has built-in security mechanisms.
     Files and directories have permissions associated to them; as a
     result, some cannot be accessed by the normal user; (see Section
     ``Permissions and Ownership''). DOS and Windows, on the contrary,
     will let you wipe out the entire contents of your hard disk;

  ·  there's a special user called ``root'': the system administrator,
     with full power of life and death on the machine. If you work on
     your own PC, you'll be root as well. Working as root is dangerous:
     any mistake can seriously damage or destroy the system just like
     with DOS/Windows. Don't work as root unless absolutely necessary;

  ·  much of the complexity of Linux comes from its extreme
     configurability: virtually every feature and every application can
     be tailored through one or more configuration files. Complexity is
     the price to pay for power;

  ·  redirection and piping are a side DOS feature, a very inportant one
     and much more powerful under Linux. Simple commands can be strung
     together to accomplish complex tasks. I strongly suggest that you
     learn how to use them.

  1.2.2.  Getting Help

  There are many ways to get help with Linux. The most important are:

  ·  reading the documentation---I mean it. Although the HOWTO you are
     reading may serve as an introduction to Linux, there are several
     books that you really should read: at least, Matt Welsh's ``Linux
     Installation and Getting Started'' (
     <>) and the Linux FAQ (
     <>). Feel a guilty
     conscience until you have read at least one of them;

  ·  the documentation of the packages installed on the machine is often
     found in subdirectories under /usr/doc/;

  ·  to get some help about the ``internal commands'' of the shell, type
     help or, better, man bash or info bash;

  ·  to get help about a command, type man command that invokes the
     manual (``man'') page of command. Alternatively, type info command
     that invokes, if available, the info page pertinent of command;
     info is a hypertext-based documentation system, perhaps not
     intuitive to use at first. Finally, you may try apropos command or
     whatis command. With all of these commands, press `q' to exit.

  ·  finally, on the Internet: the right place for getting help is
     Usenet, like  <news:comp.os.linux.setup>. Please don't email me for
     help, because I'm quite overloaded.

  1.3.  Conventions

  Throughout this work, examples will often follow the following format:
  <...> is a required argument, while [...] an optional one.  Example:

       $ tar -tf <file.tar> [> redir_file]

  file.tar must be indicated, but redirection to redir_file is optional.

  ``RMP'' means ``please Read the Man Pages for further information''. I
  can't stress enough how important reading the documentation is.

  When the prompt of a command example is #, the command can only be
  performed by root.

  2.  For the Impatient

  Want to strike out? Have a look at this table:

       DOS                     Linux                   Notes

       ATTRIB (+-)attr file    chmod <mode> file       completely different
       BACKUP                  tar -Mcvf device dir/   ditto
       CD dirname\             cd dirname/             almost the same syntax
       COPY file1 file2        cp file1 file2          ditto
       DEL file                rm file                 beware - no undelete
       DELTREE dirname         rm -R dirname/          ditto
       DIR                     ls                      not exactly the same syntax
       DIR file /S             find . -name file       completely different
       EDIT file               vi file                 I think you won't like it
                               jstar file              feels like dos' edit
       EDLIN file              ed file                 forget it
       FORMAT                  fdformat,
                               mount, umount           quite different syntax
       HELP command            man command,            same philosophy
                               info command
       MD dirname              mkdir dirname/          almost the same syntax
       MORE < file             less file               much better
       MOVE file1 file2        mv file1 file2          ditto
       NUL                     /dev/null               ditto
       PRINT file              lpr file                ditto
       PRN                     /dev/lp0,
                               /dev/lp1                ditto
       RD dirname              rmdir dirname/          almost the same syntax
       REN file1 file2         mv file1 file2          not for multiple files
       RESTORE                 tar -Mxpvf device       different syntax
       TYPE file               less file               much better
       WIN                     startx                  poles apart!

  If you need more than a table of commands, please refer to the
  following sections.

  3.  Meet bash

  Good news: with Linux you type much less at the prompt, because the
  bash shell types for you whenever possible, and features cool line
  editing capabilities. To begin with, the arrow-up key recalls previous
  command lines; but there's more. Pressing <TAB> completes file and
  directory names, so typing

       $ ls /uTABloTABbTAB

  is like typing

       $ ls /usr/local/bin

  If there were ambiguities, as typing

       $ ls /uTABloTABiTAB

  bash stops because it doesn't know if you mean /usr/local/info or
  /usr/local/include. Supply more characters then press <TAB> again.

  Other useful key presses are <ESC-BACKSPACE> that deletes a word to
  the left, while <ESC-D> deletes a word to the right; <ESC-F> moves the
  cursor one word to the right, <ESC-B> to the left; <CTRL-A> moves to
  the beginning of the line, <CTRL-E> to the end. The <ALT> key is
  equivalent to <ESC>.

  Enough for now. Once you get used to these shortcuts, you'll find the
  DOS prompt very annoying...

  4.  Files and Programs

  4.1.  Files: Preliminary Notions

  Linux has a structure of directories and files very similar to that of
  DOS/Win. Files have filenames that obey special rules, are stored in
  directories, some are executable, and among these most have command
  switches. Moreover, you can use wildcard characters, redirection, and
  piping. There are only a few minor differences:

  ·  under DOS, file names are in the so-called 8.3 form; e.g.
     NOTENOUG.TXT. Under Linux we can do better. If you installed Linux
     using a file system like ext2 or umsdos, you can use longer
     filenames (up to 255 characters), and with more than one dot: for
     example, This_is.a.VERY_long.filename. Please note that I used both
     upper and lower case characters: in fact...

  ·  upper and lower case characters in file names or commands are
     different. Therefore, FILENAME.tar.gz and filename.tar.gz are two
     different files. ls is a command, LS is a mistake;

  ·  Windows users, beware when using long file names under Linux. If a
     file name contains spaces (not recommended but possible), you must
     enclose the file name in double quotes whenever you refer to it.
     For example:

       $ # the following command makes a directory called "My old files"
       $ mkdir "My old files"
       $ ls
       My old files    bin     tmp

  Further, some characters shouldn't be used: some of those are !*$&#.

  ·  there are no compulsory extensions like .COM and .EXE for programs,
     or .BAT for batch files. Executable files are marked by an asterisk
     `*' at the end of their name when you issue the ls -F command. For

       $ ls -F
       I_am_a_dir/   cindy.jpg    cjpg*   letter_to_Joe    my_1st_script*  old~

  The files cjpg* and my_1st_script* are executables, that is ``pro­
  grams''. Under DOS, backup files end in .BAK, while under Linux they
  end with a tilde `~'. Further, a file whose name starts with a dot is
  considered as hidden. Example: the file won't show
  up after the ls command;

  ·  DOS program switches are obtained with /switch, Linux switches with
     -switch or --switch. Example: dir /s<tt> becomes ls -R. Note that
     many DOS programs, like PKZIP or ARJ, use UNIX-style switches.

  You can now jump to Section ``Translating Commands from DOS to
  Linux'', but if I were you I'd read on.

  4.2.  Symbolic Links

  UNIX has a type of file that doesn't exist under DOS: the symbolic
  link.  This can be thought of as a pointer to a file or to a
  directory, and can be used instead of the file or directory it points
  to; it's similar to Windows shortcuts. Examples of symbolic links are
  /usr/X11, which points to /usr/X11R6; /dev/modem, which points to
  either /dev/ttyS0 or /dev/ttyS1.

  To make a symbolic link:

       $ ln -s <file_or_dir> <linkname>


       $ ln -s /usr/doc/g77/DOC g77manual.txt

  Now you can refer to g77manual.txt instead of /usr/doc/g77/DOC. Links
  appear like this in directory listings:

  $ ls -F
  $ ls -l
  (several things...)           g77manual.txt -> /usr/doc/g77/DOC

  4.3.  Permissions and Ownership

  DOS files and directories have the following attributes: A (archive),
  H (hidden), R (read-only), and S (system). Only H and R make sense
  under Linux: hidden files start with a dot, and for the R attribute,
  read on.

  Under UNIX a file has ``permissions'' and an owner, who in turn
  belongs to a ``group''. Look at this example:

       $ ls -l /bin/ls
       -rwxr-xr-x  1  root  bin  27281 Aug 15 1995 /bin/ls*

  The first field contains the permissions of the file /bin/ls, which
  belongs to root, group bin. Leaving the remaining information aside,
  remember that -rwxr-xr-x means, from left to right:

  - is the file type (- = ordinary file, d = directory, l = link, etc);
  rwx are the permissions for the file owner (read, write, execute); r-x
  are the permissions for the group of the file owner (read, execute);
  (I won't cover the concept of group, you can survive without it as
  long as you're a beginner ;-) r-x are the permissions for all other
  users (read, execute).

  The directory /bin has permissions, too: see Section ``Directories
  Permissions'' for further details. This is why you can't delete the
  file /bin/ls unless you are root: you don't have the permission to do
  so. To change a file's permissions, the command is:

       $ chmod <whoXperm> <file>

  where who is u (user, that is owner), g (group), o (other), X is
  either + or -, perm is r (read), w (write), or x (execute). Common
  examples of chmod use are the following:

       $ chmod +x file

  this sets the execute permission for the file.

       $ chmod go-rw file

  this removes read and write permission for everyone but the owner.

       $ chmod ugo+rwx file

  this gives everyone read, write, and execute permission.

       # chmod +s file

  this makes a so-called ``setuid'' or ``suid'' file---a file that
  everyone can execute with its owner's privileges. Typically, you'll
  come across root suid files; these are often important system files,
  like the X server.

  A shorter way to refer to permissions is with digits: rwxr-xr-x can be
  expressed as 755 (every letter corresponds to a bit: --- is 0, --x is
  1, -w- is 2, -wx is 3...). It looks difficult, but with a bit of
  practice you'll understand the concept. root, being the superuser, can
  change everyone's file permissions. RMP.

  4.4.  Files: Translating Commands

  On the left, the DOS commands; on the right, their Linux counterpart.

       ATTRIB:         chmod
       COPY:           cp
       DEL:            rm
       MOVE:           mv
       REN:            mv
       TYPE:           more, less, cat

  Redirection and plumbing operators:  < > >> |

  Wildcards: * ?

  nul:        /dev/null

  prn, lpt1:  /dev/lp0 or /dev/lp1; lpr

  4.4.1.  Examples

       DOS                                     Linux

       C:\GUIDO>ATTRIB +R FILE.TXT             $ chmod 400 file.txt
       C:\GUIDO>COPY JOE.TXT JOE.DOC           $ cp joe.txt joe.doc
       C:\GUIDO>COPY *.* TOTAL                 $ cat * > total
       C:\GUIDO>COPY FRACTALS.DOC PRN          $ lpr fractals.doc
       C:\GUIDO>DEL TEMP                       $ rm temp
       C:\GUIDO>DEL *.BAK                      $ rm *~
       C:\GUIDO>MOVE PAPER.TXT TMP\            $ mv paper.txt tmp/
       C:\GUIDO>REN PAPER.TXT PAPER.ASC        $ mv paper.txt paper.asc
       C:\GUIDO>PRINT LETTER.TXT               $ lpr letter.txt
       C:\GUIDO>TYPE LETTER.TXT                $ more letter.txt
       C:\GUIDO>TYPE LETTER.TXT                $ less letter.txt
       C:\GUIDO>TYPE LETTER.TXT > NUL          $ cat letter.txt > /dev/null
               n/a                             $ more *.txt *.asc
               n/a                             $ cat section*.txt | less


  ·  * is smarter under Linux: * matches all files except the hidden
     ones; .* matches all hidden files (but also the current directory
     `.' and parent directory `..': beware!); *.* matches only those
     that have a `.' in the middle or that end with a dot; p*r matches
     both `peter' and `piper'; *c* matches both `picked' and `peck';

  ·  when using more, press <SPACE> to read through the file, `q' to
     exit. less is more intuitive and lets you use the arrow keys;

  ·  there is no UNDELETE, so think twice before deleting anything;

  ·  in addition to DOS' < > >>, Linux has 2> to redirect error messages
     (stderr); moreover, 2>&1 redirects stderr to stdout, while 1>&2
     redirects stdout to stderr;

  ·  Linux has another wildcard: the []. Usage: [abc]* matches files
     starting with a, b, c; *[I-N1-3] matches files ending with I, J, K,
     L, M, N, 1, 2, 3;

  ·  lpr <file> prints a file in background. To check the status of the
     print queue, use lpq; to remove a file from the print queue, use

  ·  there is no DOS-like RENAME; that is, mv *.xxx *.yyy won't work. A
     REN-like command is available on

  ·  use cp -i and mv -i to be warned when a file is going to be

  4.5.  Running Programs: Multitasking and Sessions

  To run a program, type its name as you would do under DOS. If the
  directory (Section ``Using Directories'') where the program is stored
  is included in the PATH (Section ``System Initialisation Files''), the
  program will start. Exception: unlike DOS, under Linux a program
  located in the current directory won't run unless the directory is
  included in the PATH. Escamotage: being prog your program, type
  This is what the typical command line looks like:

       $ command [-s1 [-s2] ... [-sn]] [par1 [par2] ... [parn]] [< input] [> output]

  where -s1, ..., -sn are the program switches, par1, ..., parn are the
  program parameters. You can issue several commands on the command

       $ command1 ; command2 ; ... ; commandn

  That's all about running programs, but it's easy to go a step beyond.
  One of the main reasons for using Linux is that it is a multitasking
  os---it can run several programs (from now on, processes) at the same
  time. You can launch processes in background and continue working
  straight away. Moreover, Linux lets you have several sessions: it's
  like having many computers to work on at once!

  ·  To switch to session 1..6 on the virtual consoles, press <ALT-F1>
     ... <ALT-F6>

  ·  To start a new session in the same v.c. without leaving the current
     one, type su - <loginname>. Example: su - root. This is useful, for
     instance, when you need to perform a task that only root can do.

  ·  To end a session, type exit. If there are stopped jobs (see later),
     you'll be warned.

  ·  To launch a process in background, add an ampersand '&' at the end
     of the command line:

       $ progname [-switches] [parameters] [< input] [> output] &
       [1] 123

  the shell identifies the process with a job number (e.g. [1]; see
  below), and with a PID (Process Identification Number; 123 in our

  ·  To see how many processes there are, type ps ax. This will output a
     list of currently running processes.

  ·  To kill (terminate) a process, type kill <PID>. You may need to
     kill a process when you don't know how to quit it the right way....
     Unless you're root, you can't kill other people's processes.
     Sometimes, a process will only be killed by kill -SIGKILL <PID>.

     In addition, the shell allows you to stop or temporarily suspend a
     process, send a process to background, and bring a process from
     background to foreground. In this context, processes are called
  ·  To see how many jobs there are, type jobs. Here the jobs are
     identified by their job number, not by their PID.

  ·  To stop a process running in foreground, press <CTRL-C> (it won't
     always work).

  ·  To suspend a process running in foreground, press <CTRL-Z> (ditto).

  ·  To send a suspended process into background, type bg <%job> (it
     becomes a job).

  ·  To bring a job to foreground, type fg <%job>. To bring to
     foreground the last job sent to background, simply type fg.

  ·  To kill a job, type kill <%job> where <job> may be 1, 2, 3,...

  Using these commands you can format a disk, zip a bunch of files,
  compile a program, and unzip an archive all at the same time, and
  still have the prompt at your disposal. Try this with Windows, just to
  see the difference in performance (if it doesn't crash, of course).

  4.6.  Running Programs on Remote Computers

  To run a program on a remote machine whose name is

       $ telnet

  After logging in, start your favourite program. Needless to say, you
  must have a shell account on the remote machine.

  If you have X11, you can even run an X application on a remote
  computer, displaying it on your X screen. Let be
  the remote X computer and let be your Linux machine.
  To run from an X program that resides on, do the following:

  ·  fire up X11, start an xterm or equivalent terminal emulator, then

       $ xhost
       $ telnet

  ·  after logging in, type:

       remote:$ progname &

  (instead of DISPLAY..., you may have to write: setenv DISPLAY It depends on the remote shell.)

  Et voila! Now progname will start on and will be
  displayed on your machine. Don't try this over the modem though, for
  it's too slow to be usable. Moreover, this is a crude and insecure
  method: please read the ``Remote X Apps mini-HOWTO'' at

  5.  Using Directories

  5.1.  Directories: Preliminary Notions

  We have seen the differences between files under DOS/Win and Linux. As
  for directories, under DOS/Win the root directory is \, under Linux it
  is /. Similarly, nested directories are separated by \ under DOS/Win,
  by / under Linux. Example of file paths:

       Linux:  /home/guido/papers/geology/middle_eocene.tex

  As usual, .. is the parent directory and . is the current directory.
  Remember that the system won't let you cd, rd, or md everywhere you
  want. Each user has his or her stuff in a directory called `home',
  given by the system administrator; for instance, on my PC my home dir
  is /home/guido.

  5.2.  Directories Permissions

  Directories, too, have permissions. What we have seen in Section
  ``Permissions and Ownership'' applies to directories as well (user,
  group, and other). For a directory, rx means you can cd to that
  directory, and w means that you can delete a file in the directory
  (according to the file's permissions, of course), or the directory

  For example, to prevent other users from snooping in /home/guido/text:

       $ chmod o-rwx /home/guido/text

  5.3.  Directories: Translating Commands

  DIR:            ls, find, du
  CD:             cd, pwd
  MD:             mkdir
  RD:             rmdir
  DELTREE:        rm -rf
  MOVE:           mv

  5.3.1.  Examples

       DOS                                     Linux

       C:\GUIDO>DIR                            $ ls
       C:\GUIDO>DIR FILE.TXT                   $ ls file.txt
       C:\GUIDO>DIR *.H *.C                    $ ls *.h *.c
       C:\GUIDO>DIR/P                          $ ls | more
       C:\GUIDO>DIR/A                          $ ls -l
       C:\GUIDO>DIR *.TMP /S                   $ find / -name "*.tmp"
       C:\GUIDO>CD                             $ pwd
               n/a - see note                  $ cd
               ditto                           $ cd ~
               ditto                           $ cd ~/temp
       C:\GUIDO>CD \OTHER                      $ cd /other
       C:\GUIDO>CD ..\TEMP\TRASH               $ cd ../temp/trash
       C:\GUIDO>MD NEWPROGS                    $ mkdir newprogs
       C:\GUIDO>MOVE PROG ..                   $ mv prog ..
       C:\GUIDO>MD \PROGS\TURBO                $ mkdir /progs/turbo
       C:\GUIDO>DELTREE TEMP\TRASH             $ rm -rf temp/trash
       C:\GUIDO>RD NEWPROGS                    $ rmdir newprogs
       C:\GUIDO>RD \PROGS\TURBO                $ rmdir /progs/turbo


  ·  when using rmdir, the directory to remove must be empty. To delete
     a directory and all of its contents, use rm -rf (at your own risk).

  ·  the character `~' is a shortcut for the name of your home
     directory. The commands cd or cd ~ will take you to your home
     directory from wherever you are; the command cd ~/tmp will take you
     to /home/your_home/tmp.

  ·  cd - ``undoes'' the last cd.

  6.  Floppies, Hard Disks, and the Like

  There are two ways to manage devices under Linux: the DOS way and the
  UNIX way. Take your pick.

  6.1.  Managing Devices the DOS Way

  Most Linux distributions include the Mtools suite, a set of commands
  that are perfectly equivalent to their DOS counterpart, but start with
  an `m': i.e., mformat, mdir, mdel, mmd, and so on. They can even
  preserve long file names, but not file permissions. If you configure
  Mtools editing a file called /etc/mtools.conf (a sample is provided in
  the distribution), you can also access the DOS/Win partition, the
  CD--ROM, and the Zip drive. To format a fresh disk though, the mformat
  command won't do. As root, you'll have to issue this command
  beforehand: fdformat /dev/fd0H1440.

  You can't access files on the floppy with a command like, say, less
  a:file.txt! This is the disadvantage of the DOS way of accessing

  6.2.  Managing Devices the UNIX Way

  UNIX has a different way to handle devices. There are no separate
  volumes like A: or C:; a disk, be it a floppy or whatever, becomes
  part of the local file system through an operation called
  ``mounting''. When you're done using the disk, before extracting it
  you must ``unmount'' it.

  Physically formatting a disk is one thing, making a file system on it
  is another. The DOS command FORMAT A: does both things, but under
  Linux there are separate commands. To format a floppy, see above; to
  create a file system:

       # mkfs -t ext2 -c /dev/fd0H1440

  You can use dos, vfat (recommended) or other formats instead of ext2.
  Once the disk is prepared, mount it with the command

       # mount -t ext2 /dev/fd0 /mnt

  specifying the right file system if you don't use ext2. Now you can
  address the files in the floppy using /mnt instead of A: or B:.

       DOS                                     Linux

       C:\GUIDO>DIR A:                         $ ls /mnt
       C:\GUIDO>COPY A:*.*                     $ cp /mnt/* .
       C:\GUIDO>COPY *.ZIP A:                  $ cp *.zip /mnt
       C:\GUIDO>EDIT A:FILE.TXT                $ jstar /mnt/file.txt
       C:\GUIDO>A:                             $ cd /mnt
       A:> _                                   /mnt/$ _

  When you've finished, before extracting the disk you must unmount it
  with the command

       # umount /mnt

  Obviously, you have to fdformat and mkfs only unformatted disks, not
  previously used ones. If you want to use the drive B:, refer to
  fd1H1440 and fd1 instead of fd0H1440 and fd0 in the examples above.

  Needless to say, what applies to floppies also applies to other
  devices; for instance, you may want to mount another hard disk or a
  CD--ROM drive. Here's how to mount the CD--ROM:

       # mount -t iso9660 /dev/cdrom /mnt

  This was the ``official'' way to mount your disks, but there's a trick
  in store. Since it's a bit of a nuisance having to be root to mount a
  floppy or a CD--ROM, every user can be allowed to mount them this way:

  ·  as root, do the following:

       # mkdir /mnt/floppy ; mkdir /mnt/cdrom
       # chmod 777 /mnt/floppy /mnt/cd*
       # # make sure that the CD-ROM device is right
       # chmod 666 /dev/hdb ; chmod 666 /dev/fd*

  ·  add in /etc/fstab the following lines:

       /dev/cdrom      /mnt/cdrom  iso9660 ro,user,noauto          0       0
       /dev/fd0        /mnt/floppy vfat    user,noauto             0       0

  Now, to mount a DOS floppy and a CD--ROM:

       $ mount /mnt/floppy
       $ mount /mnt/cdrom

  /mnt/floppy and /mnt/cdrom can now be accessed by every user. Remember
  that allowing everyone to mount disks this way is a gaping security
  hole, if you care.

  Two useful commands are df, which gives information on the mounted
  file systems, and du dirname which reports the disk space consumed by
  the directory.

  6.3.  Backing Up

  There are several packages to help you, but the very least you can do
  for a multi-volume backup is (as root):

       # tar -M -cvf /dev/fd0H1440 dir_to_backup/

  Make sure to have a formatted floppy in the drive, and several more
  ready.  To restore your stuff, insert the first floppy in the drive
  and do:

       # tar -M -xpvf /dev/fd0H1440

  7.  What About Windows?

  The ``equivalent'' of Windows is the graphic system X Window System.
  Unlike Windows or the Mac, X11 wasn't designed for ease of use or to
  look good, but just to provide graphic facilities to UNIX
  workstations. These are the main differences:

  ·  while Windows looks and feels the same all over the world, X11 does
     not: it's much more configurable. X11's overall look is given by a
     key component called ``window manager'', of which you have a wide
     choice: fvwm, basic but nice and memory efficient, fvwm2-95,
     Afterstep, WindowMaker, Enlightenment, and many more. The w.m. is
     usually invoked from .xinitrc;

  ·  your w.m. can be configured so as a window acts as under, er,
     Windows: you click on it and it comes to foreground. Another
     possibility is that it comes to foreground when the mouse moves
     over it (``focus''). Also, the placement of windows on the screen
     can be automatic or interactive: if a strange frame appears instead
     of your program, left click where you want it to appear;

  ·  most features can be tailored editing one or more configuration
     files. Read the docs of your w.m.: the configuration file can be
     .fvwmrc, .fvwm2rc95, .steprc, etc. A sample configuration file is
     typically found in /etc/X11/window-manager-name/system.window-

  ·  X11 applications are written using special libraries (``widget
     sets''); as several are available, applications look different. The
     most basic ones are those that use the Athena widgets (2--D look;
     xdvi, xman, xcalc); others use Motif (netscape), others still use
     Tcl/Tk, Qt, Gtk, XForms, and what have you. Nearly all of these
     libraries provide roughly the same look and feel as Windows;

  ·  the feel, unfortunately, can be incoherent. For instance, if you
     select a line of text using the mouse and press <BACKSPACE>, you'd
     expect the line to disappear, right? This won't work with
     Athena--based apps, but it does with other widget sets;

  ·  how scrollbars and resizing work depends on the w.m. and the widget
     set. Tip: if you find that the scrollbars don't behave as you would
     expect, try using the central button or the two buttons together to
     move them;

  ·  applications don't have an icon by default, but they can have many.
     Most w.m. feature a menu you recall by clicking on the desktop
     (``root window''); needless to say, the menu can be tailored. To
     change the root window appearance, use xsetroot or xloadimage;

  ·  the clipboard can only contain text, and behaves strange. Once
     you've selected text, it's already copied to the clipboard: move
     elsewhere and press the central button to paste it. There's an
     application, xclipboard, that provides for multiple clipboard

  ·  drag and drop is an option, and is only available if you use X11
     applications and/or w.m. that support it.

  This said, good news for you. There are projects that aim at making
  X11 look and behave as coherently as Windows. Gnome,
  <>, and KDE,  <>, are simply
  awesome. Most likely your distribution uses either or both. You won't
  regret your Windows desktop anymore!

  8.  Tailoring the System

  8.1.  System Initialisation Files

  Two important files under DOS are AUTOEXEC.BAT and CONFIG.SYS, which
  are used at boot time to initialise the system, set some environment
  variables like PATH and FILES, and possibly launch a program or batch
  file. Additionally, Windows has the infamous registry---one of the
  worst ideas ever conceived in computer science.

  Under Linux there are lots of initialisation files, some of which you
  had better not tamper with until you know exactly what you are doing;
  they reside in the /etc tree. All configuration can be done editing
  plain text files. If all you need is setting the PATH and other
  environment variables, or you want to change the login messages or
  automatically launch a program on login, have a look at the following

  FILES                                   NOTES

  /etc/issue                              sets pre-login message
  /etc/motd                               sets post-login message
  /etc/profile                            sets $PATH and other variables, etc.
  /etc/bashrc                             sets aliases and functions, etc.
  /home/your_home/.bashrc                 sets your aliases + functions
  /home/your_home/.bash_profile   or
  /home/your_home/.profile                sets environment + starts your progs

  If the latter file exists (note that it is a hidden file), it will be
  read after the login, and the commands therein will be executed.

  Example---look at this .bash_profile:

  # I am a comment
  echo Environment:
  printenv | less   # equivalent of command SET under DOS
  alias d='ls -l'   # easy to understand what an alias is
  alias up='cd ..'
  echo "I remind you that the path is "$PATH
  echo "Today is `date`"  # use the output of the command 'date'
  echo "Have a good day, "$LOGNAME
  # The following is a "shell function"
  ctgz() # List the contents of a .tar.gz archive.
    for file in $*
      gzip -dc ${file} | tar tf -
  # end of .profile

  $PATH and $LOGNAME, you guessed right, are environment variables.
  There are many others to play with; for instance, RMP for apps like
  less or bash.

  Putting this line in your /etc/profile will provide the rough
  equivalent of PROMPT $P$G:

       export PS1="\w\\$ "

  8.2.  Program Initialisation Files

  Under Linux, virtually everything can be tailored to your needs. Most
  programs have one or more initialisation files you can fiddle with,
  often as a .prognamerc in your home dir. The first ones you'll want to
  modify are:

  ·   .inputrc: used by bash to define key bindings;

  ·   .xinitrc: used by startx to initialise X Window System;

  ·   .fvwmrc: used by the window manager fvwm.

  ·   .joerc, .jstarrc: used by the editor joe;

  ·   .jedrc: used by the editor jed;

  ·   .pinerc: used by the mail reader pine;

  ·   .Xdefault: used by many X programs.

  For all of these and the others you'll come across sooner or later,
  RMP.  Perhaps I could interest you in the Configuration HOWTO,

  9.  Networking: Concepts

  Not only is ``Dialup Networking'' available under Linux, it's also
  more stable and quicker. The name of the game is ``PPP'', the protocol
  employed for connecting to the Internet using modems. All you need is
  a tool that dials out and makes the connection.

  To retrieve your mail from the ISP's server you need a tool called
  ``email fetcher'' that uses the POP protocol; when the mail is fetched
  it will appear as though it had been directly delivered to your Linux
  box. You'll then use a MUA (Mail User Agent) like pine, mutt, elm or
  many others to manage it.

  While under Windows the dialer is automatically invoked when you
  launch an Internet application, under Linux the path is the other way
  round: you dial first, then launch the application. A thing called
  diald provides the usual behaviour. Installing and configuring dialup
  networking used to be one of the most difficult things to do under
  Linux, but not anymore: please consult the Configuration HOWTO.

  Finally, a word about ``Network neighborhood'': you can make your
  Linux workstation appear as Windows NT/9x in a local network of
  Windows machines!  The magic word is Samba: not the lively Brazilian
  dance, but an implementation of the SMB protocol for Linux. Go to

  10.  A Bit of Programming

  10.1.  Shell Scripts: .BAT Files on Steroids

  If you used .BAT files to create shortcuts of long command lines (I
  did a lot), this goal can be attained by inserting appropriate alias
  lines (see example above) in profile or .bash_profile. But if your
  .BATs were more complicated, then you'll love the scripting language
  made available by the shell: it's as powerful as good ol' QBasic, if
  not more. It has variables, structures like while, for, case, if...
  then... else, and lots of other features: it can be a good alternative
  to a ``real'' programming language.

  To write a script---the equivalent of a .BAT file under DOS---all you
  have to do is write a standard ASCII file containing the instructions,
  save it, then make it executable with the command chmod +x
  <scriptfile>.  To execute it, type its name.

  A word of warning. The system editor is called vi, and in my
  experience most new users find it very difficult to use. I'm not going
  to explain how to use it; please consult Matt Welsh's book or search
  for a tutorial on the net. Suffice it here to say that:

  ·  to insert some text, type i then your text;

  ·  to delete characters, type <ESC> then x;

  ·  to quit vi whithout saving, type <ESC> then :q!

  ·  to save and quit, type <ESC> then :wq.

  A good beginner editor is joe: invoking it by typing jstar you'll get
  the same key bindings as the DOS/Win editor. jed in WordStar or IDE
  mode is even better. Please consult Section ``Where to Find
  Applications'' to see where to get these editors.

  Writing scripts under bash is such a vast subject it would require a
  book by itself, and I will not delve into the topic any further. I'll
  just give you an example of shell script, from which you can extract
  some basic rules:

  # I am a comment
  # don't change the first line, it must be there
  echo "This system is: `uname -a`" # use the output of the command
  echo "My name is $0" # built-in variables
  echo "You gave me the following $# parameters: "$*
  echo "The first parameter is: "$1
  echo -n "What's your name? " ; read your_name
  echo notice the difference: "hi $your_name" # quoting with "
  echo notice the difference: 'hi $your_name' # quoting with '
  DIRS=0 ; FILES=0
  for file in `ls .` ; do
    if [ -d ${file} ] ; then # if file is a directory
      DIRS=`expr $DIRS + 1`  # DIRS = DIRS + 1
    elif [ -f ${file} ] ; then
      FILES=`expr $FILES + 1`
    case ${file} in
      *.gif|*jpg) echo "${file}: graphic file" ;;
      *.txt|*.tex) echo "${file}: text file" ;;
      *.c|*.f|*.for) echo "${file}: source file" ;;
      *) echo "${file}: generic file" ;;
  echo "there are ${DIRS} directories and ${FILES} files"
  ls | grep "ZxY--%%WKW"
  if [ $? != 0 ] ; then # exit code of last command
    echo "ZxY--%%WKW not found"
  echo "enough... type 'man bash' if you want more info."

  10.2.  C for Yourself

  Under UNIX, the system language is C, love it or hate it. Scores of
  other languages (Java, FORTRAN, Pascal, Lisp, Basic, Perl, awk...) are
  also available.

  Taken for granted that you know C, here are a couple of guidelines for
  those of you who have been spoilt by Turbo C++ or one of its DOS kin.
  Linux's C compiler is called gcc and lacks all the bells and whistles
  that usually accompany its DOS counterparts: no IDE, on-line help,
  integrated debugger, etc. It's just a rough command-line compiler,
  very powerful and efficient. To compile your standard hello.c you'll

       $ gcc hello.c

  which will create an executable file called a.out. To give the
  executable a different name, do

       $ gcc -o hola hello.c

  To link a library against a program, add the switch -l<libname>. For
  example, to link in the math library:

       $ gcc -o mathprog mathprog.c -lm

  (The -l<libname> switch forces gcc to link the library
  /usr/lib/lib<libname>.so; so -lm links /usr/lib/

  So far, so good. But when your prog is made of several source files,
  you'll need to use the utility make. Let's suppose you have written an
  expression parser: its source file is called parser.c and #includes
  two header files, parser.h and xy.h. Then you want to use the routines
  in parser.c in a program, say, calc.c, which in turn #includes
  parser.h. What a mess!  What do you have to do to compile calc.c?

  You'll have to write a so-called Makefile, which teaches the compiler
  the dependencies between sources and objects files. In our example:

  # This is Makefile, used to compile calc.c
  # Press the <TAB> key where indicated!

  calc: calc.o parser.o
  <TAB>gcc -o calc calc.o parser.o -lm
  # calc depends on two object files: calc.o and parser.o

  calc.o: calc.c parser.h
  <TAB>gcc -c calc.c
  # calc.o depends on two source files

  parser.o:  parser.c parser.h xy.h
  <TAB>gcc -c parser.c
  # parser.o depends on three source files

  # end of Makefile.

  Save this file as Makefile and type make to compile your program;
  alternatively, save it as calc.mak and type make -f calc.mak, and of
  course RMP. You can invoke some help about the C functions, that are
  covered by man pages, section 3; for example,

       $ man 3 printf

  To debug your programs, use gdb. info gdb to learn how to use it.

  There are lots of libraries available; among the first you may want to
  use are ncurses (textmode effects), and svgalib (console graphics).
  Many editors can act as an IDE; emacs and jed, for instance, also
  feature syntax highlighting, automatic indent, and so on.
  Alternatively, get the package rhide from
  <>. It's a Borland
  IDE clone, and chances are that you'll like it.

  10.3.  X11 Programming

  If you feel brave enough to tackle X11 programming (it's not that
  difficult), there are several libraries that make writing X11 programs
  a breeze. The main sites to visit are those of GTK+,
  <>, and Qt,  <>. Gtk+ is a C-
  based widget set originally written for the graphic package The GIMP (
  <>), and is used by the Gnome environment.
  Kdeveloper is based on C++-based Qt, used by KDE. Most likely, you'll
  use one of these.

  Some of the best tools for visual programming are Kdevelop for Qt,
  <>, and Glade for GTK+,  <>.
  This page has more information:  <>.

  10.3.1.  Multi-Platform Programming

  Wouldn't it be nice if you could write code that compiled seamlessly
  under Linux and Windows using gcc? As of this writing, there are some
  widget sets that allow for more-or-less stable multi-platform
  programming. As far as stability and completeness are concerned
  though, I would say that the choice is narrowed down to only one:
  FLTK, the Fast Light Tool Kit  <>. It's amazingly
  small, quick, and stable. It also has a semi-visual builder called

  11.  The Remaining 1%

  Much more than 1%, actually...

  11.1.  Running DOS/Windows Apps

  Yes, you can to some extent run DOS and Windows applications under
  Linux!  There are two emulators that are quite good: Dosemu (
  <>) and Wine ( <>).  The
  latter is getting better release after release, and the list of
  runnable applications is getting larger. It even runs Word and Excel!

  11.2.  Using tar and gzip

  Under UNIX there are some widely used applications to archive and
  compress files. tar is used to make archives---it's like PKZIP or
  Winzipbut it doesn't compress, it only archives. To make a new

       $ tar cvf <archive_name.tar> <file> [file...]

  To extract files from an archive:

       $ tar xvf <archive_name.tar> [file...]

  To list the contents of an archive:

       $ tar tf <archive_name.tar> | less

  You can compress files using compress, which is obsolete and shouldn't
  be used any more, or gzip:

       $ compress <file>
       $ gzip <file>

  that creates a compressed file with extension .Z (compress) or .gz
  (gzip). These programs can compress only one file at a time. To

       $ compress -d <file.Z>
       $ gzip -d <file.gz>


  There are also the unarj, zip and unzip (PK??ZIP compatible)
  utilities. Files with extension .tar.gz or .tgz (archived with tar,
  then compressed with gzip) are as common in the UNIX world as .ZIP
  files are under DOS.  Here's how to list the contents of a  .tar.gz

       $ tar ztf <file.tar.gz> | less

  11.3.  Installing Applications

  First of all: installing packages is root's work. Most Linux
  applications are distributed as a .tar.gz archive, which typically
  will contain a directory aptly named containing files and/or
  subdirectories. A good rule is to install these packages from
  /usr/local with the command

       # tar zxf <archive.tar.gz>

  reading then the README or INSTALL file. In most cases, the
  application is distributed in source, which you'll have to compile;
  often, typing make then make install will suffice. If the archive
  contains a configure script, run it first. Obviously, you'll need the
  gcc or g++ compiler.

  Other archives have to be unpacked from /; this is the case with
  Slackware's .tgz archives. Other archives contain the files but not a
  subdirectory - careful not to mess things up! Always list the contents
  of the archive before installing it.
  Debian and Red Hat have their own archive format; respectively, .deb
  and .rpm. The latter is widely used by many distributions; to install
  an rpm package, type

       # rpm -i package.rpm

  11.4.  Tips You Can't Do Without

  Backscrolling: pressing <SHIFT + PAG UP> (the grey key) allows you to
  backscroll a few pages, depending on how much video memory you have.

  Resetting the screen: if you happen to more or cat a binary file, your
  screen may end up full of garbage. To fix it, blind type reset or this
  sequence of characters: echo CTRL-V ESC c RETURN.

  Pasting text: in console, see below; in X, click and drag to select
  the text in an xterm window, then click the middle button (or the two
  buttons together if you have a two-button mouse) to paste. There is
  also xclipboard (alas, only for text); don't get confused by its very
  slow response.

  Using the mouse: if you installed gpm, a mouse driver for the console,
  you can click and drag to select text, then right click to paste the
  selected text. It works across different VCs.

  Messages from the kernel: have a look at /var/adm/messages or
  /var/log/messages as root to see what the kernel has to tell you,
  including bootup messages. The command dmesg is also handy.

  11.5.  Where to Find Applications

  If you're wondering whether you can replace your old and trusted
  DOS/Win application with a Linux one, I suggest that you browse the
  main Linux software repository:  <>.
  Other good starting places are the ``Linux Applications and Utilities
  Page''  <>, the ``official''
  Linux page  <>, and  <>.

  11.6.  A Few Things You Couldn't Do

  Linux can do an awful lot of things that were cumbersome, difficult or
  impossible do to with DOS/Windows. Here's a short list that may whet
  your appetite:

  ·  at allows you to run programs at a specified time;

  ·  awk is a simple yet powerful language to manipulate data files (and
     not only). For example, being data.dat your multi field data file,

  $ awk '$2 ~ "abc" {print $1, "\t", $4}' data.dat

  prints out fields 1 and 4 of every line in data.dat whose second field
  contains ``abc''.

  ·  cron is useful to perform tasks periodically, at specified date and
     time. Type man 5 crontab.

  ·  file <filename> tells you what filename is (ASCII text, executable,
     archive, etc.);

  ·  find (see also Section ``Directories: Translating Commands'') is
     one of the most powerful and useful commands. It's used to find
     files that match several characteristics and perform actions on
     them. General use of find is:

       $ find <directory> <expression>

  where <expression> includes search criteria and actions. Examples:

       $ find . -type l -exec ls -l {} \;

  finds all the files that are symbolic links and shows what they point

       $ find / -name "*.old" -ok rm {} \;

  finds all the files matching the pattern and deletes them, asking for
  your permission first.

       $ find . -perm +111

  finds all the files whose permissions match 111 (executable).

       $ find . -user root

  finds all the files that belong to root. Lots of possibilities

  ·  grep finds text patterns in files. For example,

       $ grep -l "geology" *.tex

  lists the files *.tex that contain the word ``geology''. The variant
  zgrep works on gzipped files. RMP;

  ·  regular expressions are a complex but darn powerful way of
     performing search operations on text. For example, ^a[^a-
     m]X{4,}txt$ matches a line that starts with `a', followed by any
     character except those in the interval a-m, followed by 4 or more
     `X', and ends in `txt'. You use regular expressions with advanced
     editors, less, and many other applications. man grep for an

  ·  script <script_file> dumps the screen contents on script_file until
     you issue the command exit. Useful for debugging;

  ·  sudo allows users to perform some of root's tasks (e.g.  formatting
     and mounting disks; RMP);

  ·  uname -a gives you info about your system;

  ·  zcat and zless are useful for browsing and piping gzipped files
     without decompressing them. For example:

       $ zless textfile.gz
       $ zcat textfile.gz | lpr

  ·  The following commands often come in handy: bc, cal, chsh, cmp,
     cut, fmt, head, hexdump, nl, passwd, printf, sort, split, strings,
     tac, tail, tee, touch, uniq, w, wall, wc, whereis, write, xargs,
     znew. RMP.

  11.7.  Practicing UNIX under DOS/Win

  Believe it or not, there are fine tools that provide a UNIX-like
  environment under DOS/Windows! One is the Djgpp suite (
  <>) for DOS, while Cygwin (
  <>) is a more complex port for Win32. Both
  include the same GNU development tools and utilities as Linux; you
  won't get the same stability and performance, though.

  If you'd like to have a taste of Linux, try out Djgpp. Download and
  install the following files (as of this writing, the latest version is
  Installation instructions are provided, and you can find assistance on

  In particular, using bash under DOS/Win is a whiff of fresh air. To
  configure it properly, edit the supplied file BOOT.BAT to reflect your
  installation, then put these files in your home directory (in the
  Windows partition) instead of those provided:

       # this is _bashrc

       LS_OPTIONS="-F -s --color=yes"
       alias cp='cp -i'
       alias d='ls -l'
       alias l=less
       alias ls="ls $LS_OPTIONS"
       alias mv='mv -i'
       alias rm='rm -i'
       alias u='cd ..'

       # this is _bprof
       if [ -f ~/_bashrc ]; then
         . ~/_bashrc
       PS1='\w\$ '
       PS2='> '
       # stuff for less(1)
       LESS="-M-Q"                     # long prompt, silent
       LESSEDIT="%E ?lt+%lt. %f"       # edit top line
       VISUAL="jed"                    # editor
       LESSCHARSET=latin1              # visualise accented letters

  11.8.  Common Extensions and Related Programs

  You may come across scores of file extensions. Excluding the more
  exotic ones (i.e. fonts, etc.), here's a list of who's what:

  ·  1 ... 8: man pages. Read them with groff -Tascii -man <file.1>.

  ·  arj: archive made with arj.

  ·  dvi: output file produced by TeX (see below). xdvi to visualise it;
     dvips to turn it into a PostScript .ps file.

  ·  gz: archive made with gzip.

  ·  info: info file (sort of alternative to man pages). Get info.

  ·  lsm: Linux Software Map file. It's a plain ASCII file containing
     the description of a package.

  ·  ps: PostScript file. To visualise or print it get gs and,
     optionally, ghostview or gv.

  ·  rpm: Red Hat package. You can install it on any system using the
     package manager rpm.

  ·  taz, tar.Z: archive made with tar and compressed with compress.

  ·  tgz, tar.gz: archive made with tar and compressed with gzip.

  ·  tex: text file to submit to TeX, a powerful typesetting system. Get
     the package tex, available in many distributions.

  ·  texi: texinfo file, can produce both TeX and info files (cp.
     info). Get texinfo.

  ·  xbm, xpm, xwd: graphic file.

  ·  Z: archive made with compress.

  11.9.  Converting Files

  If you need to exchange text files between DOS/Win and Linux, be aware
  of the ``end of line'' problem. Under DOS, each line of text ends with
  CR/LF (that is, ASCII 13 + ASCII 10), with LF under Linux. If you edit
  a DOS text file under Linux, each line will likely end with a
  strange--looking `M' character; a Linux text file under DOS will
  appear as a kilometric single line with no paragraphs. There are a
  couple of tools, dos2unix and unix2dos, to convert the files.

  If your text--only files contain accented characters, make sure they
  are made under Windows (with Notepad) and not under plain DOS;
  otherwise, all accented characters will be screwed up.

  11.10.  Free Office Suites

  Yes, you can have for free what would otherwise cost a lot of money!

  StarOffice ( <>.) is currently the only
  choice, though Koffice is down the pipeline (
  <>). StarOffice is big and slow, but very good
  anyway: it offers a lot of functionality not found in Microsoft
  Office. It can also read and write Word and Excel files, although the
  conversion isn't always perfect.

  Another good package is Corel WordPerfect, a free edition of which is
  available for download. Need I say more? Go fetch it:

  12.  The End, for Now

  Congratulations! You have now grasped a little bit of UNIX and are
  ready to start working. Remember that your knowledge of the system is
  still limited, and that you are expected to do more practice with
  Linux to use it comfortably. But if all you had to do was get a bunch
  of applications and start working with them, what I included here is
  I'm sure you'll enjoy using Linux and will keep learning more about
  it---everybody does. I bet, too, that you'll never go back to DOS/Win!
  I hope I made myself understood and did a good service to my 3 or 4

  12.1.  Copyright

  Copyright (c) by Guido Gonzato, ggonza at This document may be
  distributed only subject to the terms and conditions set forth in the
  LDP License at  <>, except that
  this document must not be distributed in modified form without the
  author's consent.

  If you have questions, please refer to the Linux Documentation Project
  home page,  <>

  12.2.  Disclaimer

  This document is provided ``as is''. I put great effort into writing
  it as accurately as I could, but you use the information contained in
  it at your own risk. In no event shall I be liable for any damages
  resulting from the use of this work.

  Many thanks to Matt Welsh, the author of ``Linux Installation and
  Getting Started'', to Ian Jackson, the author of ``Linux frequently
  asked questions with answers'', to Giuseppe Zanetti, the author of the
  book ``Linux'', to all the folks who emailed me suggestions, and
  especially to Linus Torvalds and GNU who gave us Linux.

  Feedback is welcome. For any requests, suggestions, flames, etc., feel
  free to contact me.

  Enjoy Linux and life,

  Guido   =8-)

DOS-Win-to-Linux-HOWTO (last edited 2008-12-06 11:06:34 by jdd)