![[LDP]](/moin_static184/ldp/tldp.png)
Modification unauthorized. Use Discussion page if necessary
Discussion Page Content
Original HOWTO
Linux web browser station (formerly "The Linux Public Web
Browser mini-HOWTO")
Anton Chuvakin, anton@chuvakin.org
v0.0.5 10 October 2000
Describes the setup of Internet kiosk-type system based on Linux to be
deployed to provide public Internet/webmail access.
______________________________________________________________________
Table of Contents
1. Introduction
1.1 Disclaimer
1.2 Credits
1.3 New versions of this document
1.4 Changes Fri Sep 22 14:32:32 EDT 2000
1.5 TODO
1.6 Feedback
1.7 Copyright information
2. OLD GUIDE: The Linux Public Web Browser mini-HOWTO by Donald B. Marti Jr.,
2.1 Copyright and Disclaimer
2.2 Introduction
2.3 Before you begin
2.3.1 You need a graphical browser
2.3.2 You need to be able to add an account
2.3.3 You need
2.4 Add the guest account
2.5 Create or edit the following files in
2.5.1 File name:
2.5.2 File name:
2.5.3 File name:
2.5.4 File name:
2.6 Make a
2.7 Try it
2.8 Changing preferences
3. NEW GUIDE: Step-by-step guide
3.1 Install RH
3.2 Clean-up packages
3.3 Install ssh
3.4 Make a boot floppy
3.5 Modify configs
3.6 Create user
3.7 Change Netscape settings
3.8 Chown the home directory
3.9 Config lilo
3.10 REMOVE binaries
3.11 Physical security
3.12 Some final touches
4. Conclusion
5. References
______________________________________________________________________
1. Introduction
The directions below will produce the RedHat (currently version 6.2 is
used, 7.0 is in development) Linux system that boots into the bare
(=no window manager, like gnome, kde or fvwm2) X server and starts
Netscape Navigator (not Communicator, which includes Main and News
clients). Upon exiting the browser the X server is restarted and the
new Netscape process is launched as needed. The system is intended for
Internet Kiosks and similar applications. Security is emphasized at
all the stages of the setup.
This HOWTO will be updated (maybe significantly) as long as more
reports about the deployment of such boxes will arrive.
1.1. Disclaimer
Use the information in this document at your own risk. I disavow any
potential liability for the contents of this document. Use of the
concepts, examples, and/or other content of this document is entirely
at your own risk.
All copyrights are owned by their owners, unless specifically noted
otherwise. Use of a term in this document should not be regarded as
affecting the validity of any trademark or service mark.
Naming of particular products or brands should not be seen as
endorsements.
You are strongly recommended to take a backup of your system before
major installation and backups at regular intervals.
1.2. Credits
In this version I have the pleasure of acknowledging the previous
maintainer of this HOWTO who nicely agreed to transfer it to me
dmarti@????.com
1.3. New versions of this document
New versions of this document can be found at
http://www.chuvakin.org/kiodoc
1.4. Changes Fri Sep 22 14:32:32 EDT 2000
from 0.0.4 to 0.0.3
· Merged with old HOWTO
from 0.0.2 to 0.0.3
· references added
· abstract finished
1.5. TODO
· Write abstract
· Suggested hardware
· .Xdefaults disable some keys (Alt-Ctrl-F1)
· X server port 6000 attacks, do something about them
· X server under root, bad
· Eliminate more unneeded RPMs
· Implement /etc/pam.d/limits.conf to prevent netscape bloat and
system crash (well, by causing it to crash before bloat ;-) ), see
Security HOWTO
· Protect some files with chattr is nice
· Provided CDROM booting considerations
· Redo everything for RedHat 7.0
1.6. Feedback
All comments, error reports, additional information (very much
appreciated!!!) and criticism of all sorts should be directed to:
anton@chuvakin.org
http://www.chuvakin.org/
My PGP key is located at http://www.chuvakin.org/pgpkey
1.7. Copyright information
This document is copyrighted (c) 2000 Anton Chuvakin, and parts of it
are Copyright 1997 Donald B. Marti Jr. where marked as such
2. dmarti@best.com OLD GUIDE: The Linux Public Web Browser mini-HOWTO
by Donald B. Marti Jr.,
v0.3, 5 January 1998
The basic idea here is to give web access to people who wander by,
while limiting their ability to mess anything up.
2.1. Copyright and Disclaimer
Copyright 1997 Donald B. Marti Jr. This document may be redistributed
under the terms of the Linux Documentation Project license.
This document currently contains information for Netscape Navigator
only, but I plan to add notes for other browsers too as I get the
necessary information. If you try this with a different browser,
please let me know.
2.2. Introduction
The basic idea here is to give web access to people who wander by,
while limiting their ability to mess anything up.
This setup was originally intended for trade shows, but it might be
applicable other places you want to have a web browser going without
having to babysit a computer.
Following these instructions does not make your system bulletproof or
idiot-proof.
2.3. Before you begin
2.3.1. You need a graphical browser
This document assumes that you already have a running graphical web
browser, such as Netscape Navigator, on your system. You should have
permission to use your graphical web browser. If you want to use
Netscape Navigator in a commercial setting, you can buy a copy with
appropriate license through Caldera.
2.3.2. You need to be able to add an account
If you don't have the right to be root, get the system administrator
to add the ``guest'' account and give you ownership of guest's home
directory. Skip to the ``Create or edit the following files'' step
(``Create or edit the following files in /home/guest'') when he or she
is done.
2.3.3. You need httpd for a stand-alone web browsing station
If you are setting up a web browsing station to run stand-alone,
without a network connection, you should have httpd working and the
web documents installed. To tell if this is the case, enter:
lynx -dump http://localhost/
You should get the text of the home page on your system.
2.4. Add the guest account
As root, run adduser to add a user named guest. Then enter
passwd guest
to set the password for the guest account. This should be something
easy to remember, like ``guest''. You will be telling people this
password. Don't make it the same as your own password.
Then make guest's home directory owned by you. Enter
chown me.mygroup /home/guest
Replace ``me'' with your regular username and ``mygroup'' with your
group name. (On Red Hat Linux, these will be the same, since every
user has his or her own group.)
You should now exit and do the rest of the steps as yourself, not
root.
2.5. Create or edit the following files in /home/guest
2.5.1. File name: .bash_login
______________________________________________________________________
exec startx
______________________________________________________________________
This means that when guest logs in, the login shell will start up the
X Window System right away.
2.5.2. File name: .Xclients
______________________________________________________________________
netscape
______________________________________________________________________
This means that when X starts, guest just gets the web browser, no
window manager. If you prefer another web browser, do something else.
The file .Xclients should be executable by guest. Enter
chmod 755 /home/guest/.Xclients
to make it so.
2.5.3. File name: .xsession
______________________________________________________________________
#!/bin/sh
netscape
______________________________________________________________________
If you use xdm(1) to log people in, this file should make guest get
the web browser as if he or she had logged in normally. The file
.xsession should be executable by guest. Enter
chmod 755 /home/guest/.xsession
to make it so.
2.5.4. File name: .Xdefaults
______________________________________________________________________
! Disable drag-to-select.
*hysteresis: 3000
! Make visited and unvisited links the same color by default
*linkForeground: #0000EE
*vlinkForeground: #0000EE
Netscape.Navigator.geometry: =NETSCAPE_GEOMETRY
! Disable some of the keyboard commands.
*globalTranslations:
! Mouse bindings: make all mouse buttons do the same thing.
*drawingArea.translations: #replace \
<Btn1Down>: ArmLink() \n\
<Btn2Down>: ArmLink() \n\
<Btn3Down>: ArmLink() \n\
~Shift<Btn1Up>: ActivateLink() \
DisarmLink() \n\
~Shift<Btn2Up>: ActivateLink() \
DisarmLink() \n\
~Shift<Btn3Up>: ActivateLink() \
DisarmLink() \n\
Shift<Btn1Up>: ActivateLink() \
DisarmLink() \n\
Shift<Btn2Up>: ActivateLink() \
DisarmLink() \n\
Shift<Btn3Up>: ActivateLink() \
DisarmLink() \n\
<Btn1Motion>: DisarmLinkIfMoved() \n\
<Btn2Motion>: DisarmLinkIfMoved() \n\
<Btn3Motion>: DisarmLinkIfMoved() \n\
<Motion>: DescribeLink() \n\
______________________________________________________________________
This file disables blink tags, drag-to-select, and some of the key
board commands. It also makes all mouse buttons do the same thing,
hides the menu bar, and makes visited and unvisited links the same
color, so each visitor gets nice clean blue links, not ones that other
people have been thumbing through and staining purple.
You should replace the NETSCAPE_GEOMETRY in this file with an X
geometry that looks like this: XxY+0-0, where X is the width of your
screen and Y is the height of your screen + 32. This will position
the Netscape menu bar off the top of the screen, so the user won't be
distracted. For example, if your screen is 800x600, the geometry
should be 800x632+0-0.
2.6. Make a .netscape directory for guest
Enter
mkdir /home/guest/.netscape
chmod 777 /home/guest/.netscape
to create guest's .netscape directory and make it world-writable.
2.7. Try it
Log out, then log in as guest.
2.8. Changing preferences
Since you won't be able to use the menu bar as guest, you should edit
guest's preferences manually if you need to change them, or change
your own preferences to what you want guest's to be and copy the
preferences file.
3. NEW GUIDE: Step-by-step guide
3.1. Install RH
Install RedHat (further just RH) Linux on the box. Make sure shadow
and MD5 passwords are enabled. And have a nice long root password!
Refer to corresponding installation guides.
3.2. Clean-up packages
RH Linux was and is *really* buggy out of the box (both local and
remote exploits are discovered every day, see BugTRAQ database), and
many software packages installed by default can be used to obtain root
shell from non-privileged account or in the worst cases across the
network (or just mess up the box). Thus special attention should be
given to package selection on the browser workstation.
· Use workstation or custom installation mode. The latter is
recommended, when selecting groups of packages, only choose base-
system, networked workstation, mail/www services (make sure you
later replace Communicator with Navigator) and X packages and then
erase the unneeded RPMs. If using workstation mode you will have to
(possibly manually) remove about 300 packages.
· When partitioning the disk follow the scheme below. The sizes are
appropriate for the 3 GB disk, scale the sizes accordingly for
bigger drive but this is really not needed for this setup as the
whole Linux system is squeezed to under 200MB. Make sure those
partitions (/,/home,/var and /tmp) are present! Separate /usr is
not necessary! Remember to create a generous swap partition (at
least the size of RAM).
Partitions mount points and sizes used for a test system:
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 1571528 184184 1307512 12% /
/dev/hda7 300603 309 284773 0% /home
/dev/hda6 300603 20 285062 0% /tmp
/dev/hda5 809556 4640 763792 1% /var
· Remove all RPMs but those (list might be shortened later and
automatic RPM-removal shell script might be written as well)
MAKEDEV-2.5.2-1
SysVinit-2.78-5
X11R6-contrib-3.3.2-11
XFree86-100dpi-fonts-3.3.6-20
XFree86-3.3.6-20
XFree86-75dpi-fonts-3.3.6-20
XFree86-S3-3.3.6-20
XFree86-SVGA-3.3.6-20
XFree86-VGA16-3.3.6-20
XFree86-libs-3.3.6-20
XFree86-xfs-3.3.6-20
Xconfigurator-4.3.5-1
apmd-3.0final-2
ash-0.2-20
at-3.1.7-14
audiofile-0.1.9-3
authconfig-3.0.3-1
basesystem-6.0-4
bash-1.14.7-22
bc-1.05a-5
bdflush-1.5-11
binutils-2.9.5.0.22-6
bzip2-0.9.5d-2
chkconfig-1.1.2-1
chkfontpath-1.7-2
console-tools-19990829-10
cracklib-2.7-5
cracklib-dicts-2.7-5
crontabs-1.7-7
dev-2.7.18-3
diffutils-2.7-17
e2fsprogs-1.18-5
ed-0.2-13
eject-2.0.2-4
etcskel-2.3-1
file-3.28-2
filesystem-1.3.5-1
fileutils-4.0-21
findutils-4.1-34
freetype-1.3.1-5
gawk-3.0.4-2
gd-1.3-6
gdbm-1.8.0-3
getty_ps-2.0.7j-9
glib-1.2.6-3
glib10-1.0.6-6
glibc-2.1.3-15
gmp-2.0.2-13
gpm-1.18.1-7
grep-2.4-3
groff-1.15-8
gtk+-1.2.6-7
gzip-1.2.4a-2
hdparm-3.6-4
imlib-1.9.7-3
indexhtml-6.2-1
info-4.0-5
initscripts-5.00-1
iputils-20000121-2
isapnptools-1.21b-1
kbdconfig-1.9.2.4-1
kernel-2.2.14-5.0
kernel-utils-2.2.14-5.0
krb5-configs-1.1.1-9
krb5-libs-1.1.1-9
kudzu-0.36-2
ld.so-1.9.5-13
ldconfig-1.9.5-16
less-346-2
libc-5.3.12-31
libgr-2.0.13-23
libgr-progs-2.0.13-23
libjpeg-6b-10
libpng-1.0.5-3
libstdc++-2.9.0-30
libtermcap-2.0.8-20
libtiff-3.5.4-5
libungif-4.1.0-4
libxml-1.8.6-2
lilo-0.21-15
logrotate-3.3.2-1
losetup-2.10f-1
mailcap-2.0.6-1
man-1.5h1-1
mingetty-0.9.4-11
mkbootdisk-1.2.5-3
mkinitrd-2.4.1-2
mktemp-1.5-2
modutils-2.3.9-6
mount-2.10f-1
mouseconfig-4.4-1
ncompress-4.2.4-15
ncurses-5.0-11
net-tools-1.54-4
netscape-common-4.72-6
netscape-navigator-4.72-6
newt-0.50.8-2
ntsysv-1.1.2-1
pam-0.72-6
passwd-0.64.1-1
pciutils-2.1.5-2
popt-1.5-0.48
procps-2.0.6-5
psmisc-19-2
pwdb-0.61-0
raidtools-0.90-6
rdate-1.0-1
readline-2.2.1-6
redhat-logos-1.1.0-2
redhat-release-6.2-1
rootfiles-5.2-5
rpm-3.0.4-0.48
rpmfind-1.4-3
rxvt-2.6.1-8
sash-3.4-2
sed-3.02-6
setup-2.1.8-1
setuptool-1.2-5
sh-utils-2.0-5
shadow-utils-19990827-10
slang-1.2.2-5
slocate-2.1-2
stat-1.5-12
sysklogd-1.3.31-16
tar-1.13.17-3
tcl-8.0.5-35
tcp_wrappers-7.6-10
termcap-10.2.7-9
textutils-2.0a-2
time-1.7-9
timeconfig-3.0.3-2
tmpwatch-2.2-1
utempter-0.5.2-2
util-linux-2.10f-7
vixie-cron-3.0.1-40
which-2.9-2
words-2-12
xinitrc-2.9-1
xpm-3.4k-2
zlib-1.1.3-6
Unfortunately, some of the packages above might also be redundant and
potentially unsafe (even glibc, the main runtime Linux library, was
recently found to have locally exploitable bugs! And so was PAM module
library). More candidates for elimination include gpm (console mouse
services, had some exploit history last year) and many others. Xlib
has a buffer overflow but can't be eliminated. Make sure the latest
version is used.
3.3. Install ssh
Install ssh-server RPM for remote administration. Do NOT use inetd
daemon mode, make sshd run standalone and use /etc/hosts.allow for
access control (ssh daemon will read the file upon startup)
3.4. Make a boot floppy
Make sure you create a boot floppy using a mkbootdisk command as
errors in LILO configuration might render the system unbootable.
3.5. Modify configs
Make the following modifications to configuration files
· /etc/inittab
#
# inittab This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
#--fixed by anton for browser station
# Default runlevel. The runlevels used by RHS are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# --anton--
# 4 - browser X
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
#id:3:initdefault:
#--anton: default runlevel now 4! other levels protected by LILO password
id:4:initdefault:
# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6
# Things to run in every runlevel.
ud::once:/sbin/update
# Trap CTRL-ALT-DELETE
#anton -- not here, disable
#ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
# If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
#--anton -- only one is needed! comment out the rest
#2:2345:respawn:/sbin/mingetty tty2
#3:2345:respawn:/sbin/mingetty tty3
#4:2345:respawn:/sbin/mingetty tty4
#5:2345:respawn:/sbin/mingetty tty5
#6:2345:respawn:/sbin/mingetty tty6
# Run xdm in runlevel 5
# xdm is now a separate service
x:5:respawn:/etc/X11/prefdm -nodaemon
The file above disables Ctrl-Alt-Del combination and makes new run
level 4 a default runlevel. It also eliminates virtual consoles (all
but 1).
· /etc/fstab
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
/dev/hda1 / ext2 defaults,ro 1 1
/dev/hda7 /home ext2 defaults,nodev,noexec,nosuid 1 2
/dev/hda6 /tmp ext2 defaults,nodev,noexec,nosuid 1 2
/dev/hda5 /var ext2 defaults,nodev,noexec,nosuid 1 2
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto,owner 0 0
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
none /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/hda8 swap swap defaults 0 0
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Brief explanation for the options (see man mount for more)
· For / : mounted read-only (ro), just to make it a little bit harder
to do Bad Things
· For /home, /tmp and /var : nodev,noexec,nosuid will prevent (a)
starting executable from them (download and run through netscape
attack), (b)running suid executables (well, redundant in presence
of the above but nice to have too) (c)creating devices by makedev
(no faked /dev/mem for kernel module attack)
Making /home read-only might be good idea too as no netscape is not
supposed to write anything while running.
· Remember to REMOVE floppy and CDROM physically and disable
partitions (commented out)!
· /etc/rc.d/ directory
Create file xbrowser in /etc/rc.d/init.d and symlink (cd
/etc/rc.d/rc4.d ; ln -s /etc/rc.d/init.d/xbrowser S99xbrowser)it as
S99xbrowser in /etc/rc.d/rc4.d so that directory /etc/rc.d/rc4.d
looks like this
drwxrwxrwx 2 root root 4096 Sep 10 15:30 .
drwxrwxrwx 10 root root 4096 Sep 10 15:30 ..
lrwxrwxrwx 1 root root 1179 Sep 10 15:30 S05kudzu-> ../init.d/kudzu
lrwxrwxrwx 1 root root 5094 Sep 10 15:30 S10network-> ../init.d/network
lrwxrwxrwx 1 root root 1367 Sep 10 15:30 S16apmd-> ../init.d/apmd
lrwxrwxrwx 1 root root 1542 Sep 10 15:30 S20random-> ../init.d/random
lrwxrwxrwx 1 root root 3217 Sep 10 15:30 S25netfs-> ../init.d/netfs
lrwxrwxrwx 1 root root 1024 Sep 10 15:30 S30syslog-> ../init.d/syslog
lrwxrwxrwx 1 root root 989 Sep 10 15:30 S40atd-> ../init.d/atd
lrwxrwxrwx 1 root root 1031 Sep 10 15:30 S40crond-> ../init.d/crond
lrwxrwxrwx 1 root root 1203 Sep 10 15:30 S75keytable-> ../init.d/keytable
lrwxrwxrwx 1 root root 1261 Sep 10 15:30 S85gpm-> ../init.d/gpm
lrwxrwxrwx 1 root root 1956 Sep 10 15:30 S90xfs-> ../init.d/xfs
lrwxrwxrwx 1 root root 650 Sep 10 15:30 S99xbrowser-> ../init.d/xbrowser
This init files are run upon entering runlevel 4 (either at reboot or
when typing init 4 from root prompt). Files are run in order of
increasing numbers so that our xbrowser runs in the end.
xbrowser file looks like this
#!/bin/bash
# --anton: Init the box into X with browser, no login script
echo "Starting standalone browser....."
#put a mark into log
echo %%%%%%Reboot%%%%% >> /var/log/xlog
#this file marks X startrup using out xinitrc
touch /tmp/startOK
#--main loop, indefinite with the presence of /tmp/startOK file ------------------
while [ -f /tmp/startOK ] ; do
#put a mark into log
echo %%%%%%Restart%%%%% >> /var/log/xlog
#kill stuck netscape if any (this doesnt help if it turn zombie)
killall -9 netscape >& /dev/null
#clear netscape lock
if [ -f ~netscape/.netscape/lock ]; then
/bin/rm ~netscape/.netscape/lock
fi
#start X windows, no winman, using the config that starts only netscape
#config is in root home dir!!
#X server runs as root, sort of BAD
/usr/X11R6/bin/xinit /root/.xinitrc -- /usr/X11R6/bin/X bc
done
#main loop end-------------------------------
This file will start X server upon boot up with no prompting (after
LILO prompt). The X server will follow the directions in /root/.xini
trc, below. X server config is shown below too.
· Make sure /etc/sysctl.conf looks like this
# Disables packet forwarding
net.ipv4.ip_forward = 0
# Enables source route verification
net.ipv4.conf.all.rp_filter = 1
# Disables automatic defragmentation (needed for masquerading, LVS)
net.ipv4.ip_always_defrag = 0
# Disables the magic-sysrq key
#--anton: this IS important
kernel.sysrq = 0
This disable kernel interaction keys (aka Magic SysRQ keys) on
startup.
· /etc/X11/XF86Config
Make changes to /etc/X11/XF86Config that was automatically created
during install to look have those in:
# File generated by XConfigurator.
...whatever...
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#--anton -- no X server kill
#--another option is to have a kill as a means to fight broken/stuck netscape,
#--restart will bring it back after cleanup
DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#--anton -- kinda bad too
DontZoom
EndSection
...whatever...
Now, the DontZap is a questionable choice. The Crtl-Alt-Backspace
sequence might be the only way to kill stuck netscape or the one with
some window overlapping netscape controls (like, View Source or View
Page Info) as no automatic netscape fixing is implemented. Disabling
Java and JavaScript will decrease the likelihood of it crashing, but
will not eliminate this miserable occurrence altogether. In the cur
rent setup pressing Crtl-Alt-Backspace if DontZap is commented out
will cause X server to restart, killing netscape and doing a lock file
cleanup.
· /root/.xinitrc
Make sure that /root/.xinitrc looks like
/bin/rm -f ~netscape/.netscape/lock >& /dev/null
#--anton: otherwise non-root netscape cant run
#--anton only allow local but from all users
#--anton the name of test box was "afc" thus the line below
xhost +afc
#--anton:starts netscape as user "netscape" and full screen!!
#make sure 1024x768 matches your monitor
su netscape -c "netscape -no-about-splash -geometry 1024x768+0+0"
#---------------TESTING---------------------------
#these commands were used in testing to set netscpae preferences
#same as having "netscape" uiser home dir writable for this user
#export HOME=/home/netscape
#netscape -no-about-splash -geometry 1024x768+0+0 >& /tmp/LOG
#---------------TESTING---------------------------
#also needed: X as user "guest" eventually
See comments in file for explanation
3.6. Create user
Create user netscape, his home directory will be /home/netscape.
3.7. Change Netscape settings
Start netscape and apply a restricted settings as:
· no Java (known big risks, recently really big holes discovered in
Netscape Java implementation),
· no JavaScript (some risks with password stealing and web mail
hijacking),
· no cache (some Java bugs will access cache objects and then bypass
JVM restrictions),
· no cookies (might not be possible though, low risk),
· remove all launches of nonstandard applications (ideally-all
applications) with file types (by going to
Netscape->Edit->Preferences->Navigator->Applications),
· history length set to 0 (next user can't see what previous was
doing, the risk is in seeing URL-encoded passwords sometimes)
3.8. Chown the home directory
Do chown to root on /home/netscape (by chown -R root.root
/home/netscape). Make sure that his home directory belongs to root,
there are no world-writable files and subdirectories there and
permission are at least
/home/netscape/:
total 9
drwxr-xr-x 4 root root 1024 Sep 7 18:29 .
drwxr-xr-x 4 root root 1024 Sep 7 18:30 ..
-rw-r--r-- 1 root root 16 Sep 7 18:29 .bash_history
-rw-r--r-- 1 root root 24 Sep 5 08:21 .bash_logout
-rw-r--r-- 1 root root 230 Sep 5 08:21 .bash_profile
-rw-r--r-- 1 root root 124 Sep 5 08:21 .bashrc
-rw-r--r-- 1 root root 93 Sep 7 18:25 .mailcap
-rw-r--r-- 1 root root 0 Sep 7 18:25 .mime.types
drwxr-xr-x 4 root root 1024 Sep 10 08:38 .netscape
drwxr--r-- 2 root root 1024 Sep 6 00:04 .xauth
/home/netscape/.netscape:
total 264
drwxr-xr-x 4 root root 1024 Sep 10 08:38 .
drwxr-xr-x 4 root root 1024 Sep 7 18:29 ..
drwxr--r-- 2 root root 1024 Sep 6 00:04 archive
-rw------- 1 root root 14757 Sep 7 18:38 bookmarks.html
drwxr--r-- 3 root root 1024 Sep 7 18:24 cache
-rw-r--r-- 1 root root 188416 Sep 6 00:05 cert7.db
-rw-r--r-- 1 root root 16384 Sep 7 18:30 history.dat
-rw-r--r-- 1 root root 111 Sep 7 16:20 history.list
-rw-r--r-- 1 root root 16384 Sep 6 00:05 key3.db
-rw-r--r-- 1 root root 0 Sep 6 00:04 nswrapper.copy_defs
-rw-r--r-- 1 root root 279 Sep 10 08:38 plugin-list
-rw-r--r-- 1 root root 3398 Sep 7 18:29 preferences.js
-rw-r--r-- 1 root root 741 Sep 7 18:29 registry
-rw-r--r-- 1 root root 16384 Sep 7 18:29 secmodule.db
Carefully test netscape functionality upon doing the chown to root!
At present, I have not found a way to avoid periodic Netscape
complaints about "Can't write preferences".
Another note is appropriate. Netscape is VERY buggy (last example is
Red Hat Linux Security Advisory presents a way to crash and exploit
netscape using a specially crafted JPEG image) and is likely to crash
periodically, possibly producing a buffer overflow with shell access
for the intruder. This shell will have the netscape user as owner.
Thus the absence of xterm and rxvt on the system is absolutely crucial
as it provides another line of defense. Permission on the system
should also be set very conservatively (no world-writable files).
Ideally, NO files should be owned by user "netscape" on the system AT
ALL (do a find / -user netscape command to confirm this, also check
for world writable files with find / -perm -2 ! -type l -ls).
3.9. Config lilo
Modify /etc/lilo.conf
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
default=linux
image=/boot/vmlinuz-2.2.14-5.0
label=linux
read-only
root=/dev/hda1
restricted
The word restricted will cause password prompting in order to enter
non-standard runlevel (e.g. linux init 0 from LILO: prompt).
That implies using stock RH 6.2 kernel. Kernel upgrade to 2.2.16 might
be a good idea as some bugs were found in early 2.2.14 kernels (low
risk).
3.10. REMOVE binaries
REMOVE /usr/X11R6/bin/xterm xterm executable COMPLETELY! This is
REALLY IMPORTANT as shell will be much harder to obtain in this case.
Make sure its clone, rxvt, is not installed! Ideally, all programs
that can spawn a shell should be removed.
3.11. Physical security
Some physical security
· Secure reset button
· Remove CDROM and floppy disk drive
· Prevent access to the box to avoid hard drive replacement
3.12. Some final touches
Some final touches (nice but not essential for system functionality)
· Implement free disk space monitor top avoid partition overflows
· Enable remote logging (preferably to some dedicated box with host-
based IDS that analyzes the logs)
4. Conclusion
It just might work ;-)
5. References
1. Web Kiosk HOWTO
Similar HOWTO, main differences: no keyboard, uses fvwm2
2. Public Web Browser HOWTO
Similar HOWTO, older and less security oriented
3. Security HOWTO
Linux Security HOWTO
4. NIC Site
You can buy something similar to what is described in the HOWTO for
$199 (I am not affiliated with the company in any way)
5. http://www.chuvakin.org/ispdoc
I also maintain a Linux ISP HOWTO.
6. http://www.chuvakin.org/books
I also maintain a list of computer/network security related books
with (where available) reviews and online availability. If you have
a book that I don't list please use the form on the page and I will
add it to the list and maybe review it later.
